2019 Yanmar SA324 Tractor

Rydbeck Trailer Sales and Service
3101 W. IH-20
Weatherford, TX 76087
817-891-4997
www.rtrailersales.com

Stock#: 12Y
Asking Price: $13,970 2019 - Yanmar - SA324
You believe in doing a job the right way. That's why we built this tractor to work as long and as hard as you need it to. The Yanmar SA324 is the ideal compact tractor when you need versatility. Equipped with a famously reliable Yanmar three-cylinder diesel engine, the SA324 delivers a unique combination of horsepower and fuel efficiency.
Lift more. Dig deeper. Cut faster. You'll be able to use a wide range of attachments to get the most out of what your property has to offer. SA Series tractors provide the flexibility to handle any job around your property. Here's a quick look at the SA324 features:
-Hydrostatic transmission with dual pedals for simplified operation
-Power steering for less operator fatigue
-Power takeoff (PTO) and three-point hitch for attachments
-24 horsepower
-Yanmar-designed front-end loader, with class-leading lift capacity of 1,200 pounds and quick-attach for buckets, forks and other attachments
-60-inch, mid-mount, drive-over mower
-Dual hydraulic pumps - Smooth hydraulic power steering
-One touch-on/off, electro-hydraulic, independent rear PTO

Specifications
POWERTRAIN
Battery540 CCABore and Stroke in. (mm)3.15x3.30 in. (80x84 mm)Cooling systemWater cooled
FuelDieselGross Power23.4 HP (17.8 kW) MakerYanmar Maximum Torque ft.lbs. (Nm)45.7 ft.lbs (62.0 Nm)Model3TNV80FNumber of cylinders3 PTO Power at Zero Speed21.7 HP (16.2 kW)Rated RPM3,200 RPMTotal displacement77.2 cu. In. (1.266 L) Type24 Engine Horsepower Diesel Tractor

CAPACITIES
Engine Coolant3.0 qt. (2.8 L)Engine Oil3.6 qt. (3.4 L)Front Axle Oil0.92 gal. (3.5 L)
Fuel tank6.1 gal. (23.0 L)Transmission Oil4.1 gal. (15.5 L)

DRIVETRAIN
2WD/4WD engagementSelectable
BrakesWet disc
Transmission typeHydrostatic, 2 Range Speeds

HYDRAULICS
3-point hitchLimited Category 13-point lift capacity at 24" (61 cm)1,209 lbf. (548 kgf)4-way loader control valveStandard
Hydraulic Control SystemPosition Control, Open CenterPower steeringFully HydraulicPump capacity (implement) @ Rated3.7 GPM (14.1 L/min)
Pump capacity (steering) @ Rated RPM4.3 GPM (16.1 L/min)System Pressure psi (MPa)2,439 psi (16.7 MPa)

DIMENSIONS
Ground Clearance (with R4 Tires)8.5" (215 mm)Minimum Turning Radius ft. (m)8.5 ft. (2.6 m)Overall Height (with Folded ROPS, R4 Tires)70.4" (1,789 mm)
Overall height (with R4 Tires)85.8" (2,180 mm)Overall Height (with R4 Tires, Top Of Steering Wheel)55.3" (1,405 mm)Overall length (with 3PH and R4 Tires)105.8" (2,688 mm)
Weight (with ROPS, R4 Tires, Full Fluid)1,715 lbs. (778 kg)Wheelbase63.0" (1,600 mm)Width (with R4 Tires)54.6" (1,387 mm)

TIRE SIZE
Industrial (R4) - Front23 x 8.50-12 4PRIndustrial (R4) - Rear12-16.5 10PR
Turf (R3) - Front23 x 8.50-12 4PRTurf (R3) - Rear33 x12.5-16.5 4PR

TRAVELING SPEEDS
Forward (with R1 Tires)mph (kmh) Low: 0-5.9 (0-9.4), High: 0-12.3 (0-19.6)
Reverse (with R1 Tires)mph (kmh) Low: 0-4.1 (0-6.6), High: 0-8.5 (0-13.7)

PTO
Mid ShaftSAE16/32, 15 SplinesMid Speed/Engine RPM2,057/3,200Mid TypeIndependent
Power Take Off (PTO) Power HP (kW)18.1 HP (13.5 kW)Rear Shaft Size35 mm OD, 6 SplinesRear Speed/Engine RPM554/3,200
Rear TypeIndependentTypeHydraulic Clutch.

DISCLAIMER: Although we try to be as accurate as possible, we will not be held responsible if there is an error in any of our listings. Please confirm features and price with us.